Exposed construct tile

Aluminum tile

Metal tile dropped-ceiling is produced by bending and aluminum sheet punching with the thickness of 0.5 to 0.7 mm and tile dimension of 30.30 and 60.60in whether exposed or hidden forms using press and CNC punch device.
Metal tile color coverage is Coating powder or Electrostatic powder color being modifiable based on customer’s choice according to European Ral standard.
If requested, creating a pattern with company related logo or any other designs by CNC punch device on Aluminum tile is feasible.Bedding constructs related to various types of tiles is also available.
In punched types, the back side of the exposed construct tile is covered by a wad preventing from penetration the room air in to the back of dropped- ceiling provoking an acoustic characteristic in ceiling.
Aluminum tile dropped- ceiling is considered as a new idea for designers and engineers. Using various sizes, colors and patterns offers a unique effect.

Types of Aluminum tile based on dimension

Exposed construct tile (Lay in System) coming in different size, is considered as a meshed dropped ceiling whose peltaria could be observed.

Edged exposed tile

Lay in system (60.60)
Lay in system (30.30)
Lay in system (30.60)

Non-edged exposed tile

Lay in system (60.60)
Lay in system (30.30)
Lay in system (30.120)

Lay in system tile characteristics

  • 01

    Light, easy and comfortable installation

  • 02

    Thermal and acoustic insulation

  • 03
    Install ability of various types of lights, fan and valve
  • 04
    Easy availability of equipment located in back of the ceiling
  • 05
    Resistant against firing and climate conditions
  • 06
    Non-inflammable
  • 07
    Installable in humid regions due to resistance against corrosion, rust and termite
  • 08
    Galvanized bedding and electrostatic color coverage

Aluminum tile usage

  • Laboratories & hospitals

  • Administrative, commercial & residential buildings

  • Expositions & airports

  • Metro Stations

  • Amphitheaters & Restaurants

Metal tile system characteristics

  • Lay in system tile

    Modular aluminum tile with exposed meshing and maximum height of 1200 mm
    Click lockable meshing with 15mm of width

  • Lay in system tile meshing

    Meshing with bottom pendant systems:

    Double spring, gear, ductile

  • In lay system tile panel

    Aluminum sheet with thickness of 0.5 to 0.7 mm (higher thickness if requested) 

  • Lay in system tile color coverage

    Full automatic electrostatic powder color with thickness of 60 to 80 Microns according to European Ral Standard based on customer’s preference

  • Lay in system edge

    Edged panel with the height of 8 mm
    Non-edged panel

  • Lay in system tile eparation seam

    T24 construct width: 24 mm

    T15 construct width: 15mm

  • Lay in system tile acoustic insulator

    Black wads-Standard
    Other options are available if requested

  • Lay in system tile margin performance

    Edged panel: Two-stepped angular bar (profile)
    Non-edged: Angular L24

  • Lay in system tile capabilities

    Compoundable with other dropped-ceilings
    Easy carriage
    Easy cleaning
    Compatible with modular lighting
    Easy accessibility to upper-ceiling equipment

Lambeh Karan Zarin

Lambeh Karan Zarrin Company announces its readiness to offer the mentioned services to colleagues and component-producers.

Tell:  021-22911813

© All material and intellectual rights of this site are reserved by Lambeh Karan Zarin
Web design